Thermal Bundle 1.0.7
-
- SPT 3.4-3.6
- Traveler
- 12k Downloads
- 132 Comments
Do not ask when mod authors will update their mods or if they can upload older versions of their mods.
Bothering mod authors will lead to warnings and repeat offenses will lead to bans.
Bothering mod authors will lead to warnings and repeat offenses will lead to bans.
Due to an unusually high volume of traffic, our site may be experiencing intermittent slowdowns. If you notice any issues, log out of your account and browse anonymously so you can better utilize caching or try using forge.sp-tarkov.com to search for and download mods.
ЁЁЁЁЁЁЁ!!!!!!! Please check DOWNLOAD tab and select version that’s suitable for you.!!!!!!!! ЁЁЁЁЁЁЁ
New thermals are experimental and are not plug &play, you do need to fuck around to find out.
REAP-IR
- Removed Black Hot - replaced with Default White Hot 3.5x zoom (variable zoom 1x - 3.5x, both in White Hot mode)
- Increased max view distance
- uncap frame
- removed lag and motion blur
FLIR-RS32
- Increased max view distance
- Increased heat hue max visible distance
- Increased min/max distance brightness
- uncap frame
- removed lag and motion blur
T12W
- Increased max view distance
- Replaced GameBoy Hue to FLIR - heat hue visible distance same as FLIR-RS32
- uncap frame
- kept some motion blur (0.2 vs 1.2 original)
Traveler Author
Hey yo fellas Im installing new version of SPT and planning on fixing this mod and release 2 versions -
FOVfixes and default without fov fixes. Expect first weeks of December
Ih8Cheetas
Updates?
coolintan
please updates 3.7.x
Arhon
please updates 3.7.x
Shadowstalker787
Still there?
Trappy82
Wonder whatever happened to this....
Traveler Author
latest FOV FIX might have some issues with low fps using red dots and iron sights, you can try using previous version of FOV fix but then you'll have some issues with sensitivity, to fix that use gregs uniform aim.In general mod has bugs, if you are willing to go around them download 1.0.4 if not well wait until its all fixed and use 1.0.3 instead.Also FYI I have nothing to do with FOVfix I just adjusted thermal image to be used with it.
seems like latest FOVfix fixed the sensitivity + low fps with red dots you can now update and there should be no major issues
https://streamable.com/pmem78
SPTisBettrThanLive
Still around?
IHateChoosing
Still works on 3.8 (based on my fix for 3.7):
For the ones wanting to use this on 3.7.x -
- Move the content of the 1.0.7 file into the 1.0.4 file (won't break without FOV fix, but you won't see correct zoom stats and plays clunky without as you can't switch modes independently of zoom)
- adjust your bundle.json to look like this:
{
"manifest": [
{
"key": "assets/content/items/mods/scopes/scope_all_flir_rs32_225_9x_35_60hz.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_base_trijicon_reap-ir.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_all_torrey_pines_logic_t12_w_30hz.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_all_sig_sauer_echo1_thermal_reflex_sight_1_2x_30hz.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_base_armasight_zeus_pro_640_2_16x50_30hz.bundle",
"dependencyKeys": []
}
]
}
in package.json, set "akiVersion": "3.7.x", - this will remove the warnings about the version.
You may need to clear temp files to see the change, not sure tbh as i always do this - after launching spt launcher, go to settings -> clean temp files -> then launch game
Thanks Traveler for making this mod!
For 3.8, on top of the 3.7 fix above, open the package.json and
- set "akiVersion": to "3.8.x"
-add "isBundleMod": true
It should look like this:
"name": "Thermal-bundle",
"author": "Traveler",
"license": "Attribution-ShareAlike 4.0 International",
"main": "package.js",
"version": "1.0.0",
"akiVersion": "3.8.x",
"isBundleMod": true,
"devdependencies": {}
}
If author or someone could pin this until the mod is officially updated, that would be awesome
Mindless_Phantom
PLS UPDATE TO 3.7.6
erroricheems
This mod is really great! Why is your HK416 gun sound and accessories different from mine? Can you tell me what mod you used
TheEmptyWall
This is a really great mod, when will be updated??
IHateChoosing
For the ones wanting to use this on 3.7.x -
- Move the content of the 1.0.7 file into the 1.0.4 file (won't break without FOV fix, but you won't see correct zoom stats and plays clunky without as you can't switch modes independently of zoom)
- adjust your bundle.json to look like this:
{
"manifest": [
{
"key": "assets/content/items/mods/scopes/scope_all_flir_rs32_225_9x_35_60hz.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_base_trijicon_reap-ir.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_all_torrey_pines_logic_t12_w_30hz.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_all_sig_sauer_echo1_thermal_reflex_sight_1_2x_30hz.bundle",
"dependencyKeys": []
},
{
"key": "assets/content/items/mods/scopes/scope_base_armasight_zeus_pro_640_2_16x50_30hz.bundle",
"dependencyKeys": []
}
]
}
in package.json, set "akiVersion": "3.7.x", - this will remove the warnings about the version.
You may need to clear temp files to see the change, not sure tbh as i always do this - after launching spt launcher, go to settings -> clean temp files -> then launch game
Thanks Traveler for making this mod!
TheEmptyWall
following your steps icons doesnt appear, and if i inspect them appears the dodge meme error...
edit: i did not realized to extract bundle folder out of pettan folder... all good, ty for the patch
Ih8Cheetas
fingers crossed you're coming back soon!
Ih8Cheetas
also... i dont want the FOV fix mod to be able to use this in 3.7, Possibility for both options?
IHateChoosing
check above post for how to use it with the new thermals on 3.7
Ih8Cheetas
1.0.4 still requires FOV mod which i do not want so it unfortunately doesn't help me
Ymath
Consider having a look at the T-7 goggles for your next version? They feel so bad next to your fixed sights.
Traveler Author
Playing starfield until spt gets updated to ~3.7
arbiter
It is updated we are waiting
Lunnayaluna
Does the mod be loaded before/after certain mods? i have some issue where the zoom and aim sensitivity is reversed on the flir
Traveler Author
Try updating fov fix,
Load order - fov fix should be last
13.5 thermals go into petans 13.5 mod and replaced.
Anyway I’ll update the mod when new spt comes out I’d suggest to wait, I’ve made some progress making thermals loose picture quality when zooming in to mimic digital zoom.
Lunnayaluna
alright thanks
MyBoO
Thanks for the mod, it's quite awesome, but Is there a way to increan distance view for thermals?
Traveler Author
Not sure what you mean, do you not see past 150 meters? If you don’t then there is some conflict that overwriting my mod, if you mean zoom then check db.json in fov fix, scroll down you’ll see entries of the scopes - modify to your hearts content.
Sanote
Oi! How can I change the thermal modes in the bundle?
Exaples:
- In my case I want to change black hot mode variant for a white hot.
- Or even the brightness level of the super bright bluish one (AKA Ghosty color mode [which I love but it is too bright for me]).
- Or modify the filters or compression applied in the deep blue mode, so I can see a little more depth and some shapes like in the "blue/purple + orange-hot".
Traveler Author
This would be too difficult to write up, in general you’ll need to play around with values hidden in Thermal monobehaviour, there you’ll see shit ton of options, tinker around.
To swap thermal modes you would need to replace references between transforms in Optic with correlating thermal mono
WashierPine
Что делать если выдается ошибка В моде (new thermals FOVfix WITH NEW MODES) отсутствует package.json
DuDusya
У меня на зевсе не преключается кратность никак
на FLIR-RS32 и на REAP-IR не пахнет никакими 1000м прорисовки, не знаете как исправить?
Зум на них имеется.
Traveler Author
фонтан должен грузится самым последним - zzzFOVfix - папка должна выглядеть вот так вот. Читай инструкции, прорисовка 1200метров мерил с дальномером и ботами на дистанции.
Убедись что нет абсолютно никакого мода который меняет термалки.
версия собрана на соплях так как зависимы от других модов.
когда выйдет новый спт я загружу отдельную от других модов мод
DuDusya
Изменив название так как вы посоветовали, все заработало. Спасибо.
Я думал, какое то приложение есть которое меняет положение загрузки модов, по типу как LOOT в Skyrim.
Fontaine
If you want to use this with FOV Fix:
Make sure you have latest version of FOV Fix, and makes sure Pettan's 13.5 content back is loaded before FOV Fix. DO NOT INSTALL THE FILE REPLACEMENTS FOR FOV FIX included with latest release of Thermal Bundle, just install the bundle replacements for Pettan's content pack. Enable compatibility in Fov Fix's server config file. The thermal bundles for REAP IR and FLIR work fine.
Traveler Author
Aaaaaaaayyyyy can I has the mod ples
Everyone download new FOV FIX AND DO NOT REPLACE WITH MY FOV FIX FILES
DevilishKing
Please put a link or say the name of the mods required for it to work , took me 15mins to find out it isn't standalone
Thank you
Traveler Author
But they are in description for download version?
DevilishKing
When you press download on right side it doesn't send you to version page so no need to check that page
PS: I can't find any option to bind a key for variable sight , no option in f12 menu shows up unless I am missing something
MakethemsufferNL
is there anyway this mod is usable without the fov fix? i dont want the fixed fov
Traveler Author
There are multiple options just download the older version.
Also why so against FOVfix?
You can make it work like default Tarkov fov and just use the variable scope part of it smh
MakethemsufferNL
because im a no brain lmao, ill check it out, i have the older version right now but i assume the new thermals arent compatible with that. anyway i'll see if i can config something
Sh4d3
HI i have a problem ,i cannot zoom in or zoom out with new thermal's Zeus Pro and Echo1 others are working ,i have Fov FIX patch from you installed ,any advice ?
Traveler Author
just to confirm you swapped both files db/ScopeTemplates.json and SRC/mod.js?
can you please check f12 menu FOVfix, make sure you enabled variable zoom and assign keys
Sh4d3
Ok so i did a fresh Fov Fix Install got you last patch for new thermal's i install it, i checked DB folder and scopetemplates.json i have scopes insidethe file added by you.
},
"63fc44e2429a8a166c7f61e6": {
"ItemID": "63fc44e2429a8a166c7f61e6",
"Name": "scope_base_armasight_zeus_pro_640_2_16x50_30hz",
"MinZoom": 1.5,
"MaxZoom": 16,
"IsFixed": false,
"CanToggle": true,
"Unfuck": false
},
"6478641c19d732620e045e17": {
"ItemID": "6478641c19d732620e045e17",
"Name": "scope_all_sig_sauer_echo1_thermal_reflex_sight_1_2x_30hz",
"MinZoom": 1.5,
"MaxZoom": 4,
"IsFixed": false,
"CanToggle": true,
"Unfuck": false
I entred the game checked the fovfix config with F12 ,variable zoom is checked ,i have variable zoom on mouse wheel and also num + and num - installed the new thermal Zeus ,modes are working all of them but zoom in zoom out is not working,checked other thermal Reaper is working ,any more ideas ?
Traveler Author
did you install specifically this 13.5 content preview - GEAR,ATTACHMENTS and AMMO ADDED! - AKI Mods Workshop (sp-tarkov.com) and replaced files in there?
there are cople of 13.5 content patches and im not sure if they share the same item id
Sh4d3
yes i installed last update from 13.5 content preview Version 1.0.3 after that you patch
Traveler Author
oh fck, delete config file in bpenix for FOVfix and buy those thermals again.
and then back to f12 menu and reassign all the keys and zoom values FOVfix.
but in general all those issues will be fixed when SPT 3.7.x will come out with all content in base game.
3Kz4
you will Add to T-7 Thermal goggles to?
Traveler Author
no, it uses monobehavior mask/script and doesnt look the same as Optics
Danuvius_Wave
insufficient permissions for download ?
Traveler Author
i just downloaded with incognito mode so should be available to download
Fatalnightshade
is it possible to use the latest version without the 13.5 content preview? im asking because i build my mod list around spt realism and isn't sure if 13.5 content preview is compatible
Traveler Author
13.5 is compatible, go to user\mods\y1305 items preview\bundles\assets\content\items\ and delete everything BUT "mods" folder that contains weapon parts
Fatalnightshade
okay thanks ill try it out
KEKWSLAVAUKRAINE
You are the best for adding new thermals from 13.5
Ty sir.
Traveler Author
i sent files to Pettan, it'll be a much cleaner install if you prefer as an enhanced standalone 13.5 version
Ih8Cheetas
Possible update for the two new thermals?
Traveler Author
updating thermals for Pettan's 13.5 mod as i comment this.
will be included in his pack, and I'll update my mod page when full aki released
Ih8Cheetas
DOPE!
Traveler Author
fyi updated
Ih8Cheetas
you are the best!
MakethemsufferNL
Still compatible with 3.6?
Ih8Cheetas
yes it does
GooSe<3
If you don't mind me asking, How did you get the 338 DVL?
Traveler Author
it's an AXMC with dvl barrel.
I just copied DVL barrel, renamed it, retextured it, added as attachment to AXMC upper ID items.json.
looks flush enough and works as a suppressor
Wireman
Looks good man. Probably gonna copy this haha
DarthTsuna
I've encountered an issue using the Thermal Bundle mod. Using the FLIR. It flipped the 2.25x and the 9x zoom. So 2.25x is acting like 9x zoom while it's the opposite for 9x zoom.
Traveler Author
hey, if you are not using FOVfix from fountain I’d suggest downloading previous version, if it’s an issue for previous version I’ll fix it when I get a chance
PureRussianVodka
Same issue here
Traveler Author
Are you guys not using FOVfix?
Brilique
I don't know if this issue is known, but I have encountered a problem with the T12W sight on different weapons, where the aiming speed is significantly slower. So far, I haven't found any other comments about it. Could it be related to the FOV fix?
Traveler Author
Yep that’s FOVfix related, try to fiddle in FOVfix F12 sensitivity settings
Traveler Author
Also T12w is such a hack by BSG, it’s 1x mode is actually an x3.5 due to how small camera and how far it is from players head it looks like 1x.
So sensitivity is set to its zoom value.
If I set its actual 1x fov value then you will see back of your head
Brilique
Maybe this is a dumb question but how do io install this mod? For usual drag an drop into mods or BepInEx folder but this time im kind of overburdened lol
Traveler Author
SPT TARKOV\SPT 3.5.8\user\mods\