Assorted Weapons Armory

    MacrossMX#7167 added a new file:

    File
    Assorted Weapons Armory
    Add additional weapon variants through receivers with automatic fire, or chambering in different calibers.
    MacrossMX#7167
    Quote

    A successor to the old Battle Rifle mod, not only does it add variants 7.62x51(54R) DMRs with automatic fire (ex:M14, AR-10, AVDS, HK417A2), but also include many other weapon variants (5.56 and 5.45 variants of the Mk47), and some of my personal janky designs (Kedr that fires at 450rpm, 1200rpm burst PBM).


    All these receivers can be found on Mechanic

    MacrossMX#7167 added a new version:

    File
    Assorted Weapons Armory 1.1.0
    ---New addition:
    -VPO-208 : SKS loaded with .366TKM
    -SAG AK-556 and SAG AK-556S: 5.56 variants of the SAG AK-545 and 545 short
    -SAG AK-762 and SAG AK-762S: 7.62 variants of the SAG AK-545 and 545 short
    -Made an equally separate file that should be compatible with Olympus (Because Olympus is not updated for 3.2.1 as of 8/19/22, I am unable to test it, so run at your -own risk.)
    MacrossMX#7167
    Quote

    ---New addition:

    -VPO-208 : SKS loaded with .366TKM

    -SAG AK-556 and SAG AK-556S: 5.56 variants of the SAG AK-545 and 545 short

    -SAG AK-762 and SAG AK-762S: 7.62 variants of the SAG AK-545 and 545 short

    -Made an equally separate file that should be compatible with Olympus (Because Olympus is not updated for 3.2.1 as of 8/19/22, I am unable to test it, so run at your -own risk.)

    MacrossMX#7167 added a new version:

    File
    Assorted Weapons Armory 1.1.1
    New Additions:
    Automatic STM-9 (Soyuz-TM ASTM-9 Gen.2 9x19 carbine)
    Automatic Saiga-9 (PP-19-02 'Vityaz' 9x19 submachine gun)
    Automatic Saiga 12 (Saiga 12ga ver.10 12/76 automatic shotgun)
    5.56 MCX (SIG MCX Spear Gen.1 5.56x45 Assault Rifle)
    AK pattern in 9x39mm (Izhmash AK-9 9x39 Assault Rifle)

    No olympus compatible version until updated. use 1.1.0 version for Olympus compatible.
    MacrossMX#7167

    MacrossMX#7167 added a new version:

    File
    Assorted Weapons Armory 1.2.0
    New additions:
    -Weapon Masteries added to all weapons. Their masteries are matched with the original receiver (ASTM-9 shares mastery with STM-9)
    -Mod is now compatible with Olympus

    Changes:
    Mk18A 20 round magazine: recoil -5%, ergo +6%
    APBM: firetype is now [single, fullauto]. rate of fire changed from 1200 to 550

    Note:
    I only select one Olympus 250rd magazine for each receiver, so do not be alarmed if your favorite magazine is not compatible (use edit preset to find the correct magazine).

    Also, having…
    MacrossMX#7167

    MacrossMX#7167 added a new version:

    File
    Assorted Weapons Armory 1.2.1
    New addition:
    -2 new M4 receivers: full auto at 550 rpm (M4A1-550), 2 round burst (M4-2)
    5.56, 7.62, and 9x39 variants of the AKS-74U (AKS-556UN, AKMSUN, AKS-9UN)
    MacrossMX#7167
    Quote

    New addition:

    -2 new M4 receivers: full auto at 550 rpm (M4A1-550), 2 round burst (M4-2)

    5.56, 7.62, and 9x39 variants of the AKS-74U (AKS-556UN, AKMSUN, AKS-9UN)

    MacrossMX#7167 added a new version:

    File
    Assorted Weapons Armory 1.2.2
    New Addition:
    M4A1 Receiver in .300 Blackout (also added Hk416 upper receiver and its associated barrels)
    Glock 18C inspired by Counter Strike (3 round burst)

    Works with 3.2.2
    MacrossMX#7167
    Quote

    New Addition:

    M4A1 Receiver in .300 Blackout (also added Hk416 upper receiver and its associated barrels)

    Glock 18C inspired by Counter Strike (3 round burst)


    Works with 3.2.2

    I've got something going on with this mod and SVM that causes my profile to not save correctly. removing this mod solved it for me. I haven't got any critical errors except a undefined _props check on ammo but it may be something that FAIT is trying to do.


    I've downgraded to 3.2.2 for FAIT though. too bad, I liked the idea of making weapons with the receivers from this one. I noticed that when you first start the server there's a DEBUG field set to false, is there a way to enable this so i can maybe find out what the real issue is?

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login