Posts by Andrudis

  • Scav Has No Gear & Infinite Loading After Scav Raid Only

    This issue is most likely caused by one of your mods. I would bet on "astealz-SmartSpawnController". Try without any mods at all to see if issue will be gone (it should), then try adding/removing mods to see which one is causing the issue.

    If you'll be able to pinpoint problem - either play without problematic mod(s) or report to mod's author and wait for the fix.

  • [2.0.0.A9] Game won't start

    Quote


    Unstable dev builds. Please use normal builds unless you know what you're doing.

    THIS IS A BLEEDING EDGE BUILD, USE AT YOUR OWN RISK

    NO SUPPORT IS PROVIDED FOR THESE BUILDS.

    Article
    AKI BLEEDINGEDGE 2.0.0-A9 Release
    Hello there, citizens. This is a quick update to fix two major issues that were left in A8.

    But before that, let's talk about what BleedingEdge is all about:
    It's NOT a version of AKI that's meant to be played seriously - there WILL be issues, some could be game-breaking/profile-corrupting/etc. Wiping profile every update is basically a guaranteed requirement.
    It's NOT a version of AKI that anyone should use, unless you are serious about testing unfinished releases and are willing to help us…
    Terkoiz

  • Andrudis-QuestManiac

    Quote from sata

    add new quest to Peackeeper (headless PMC, headless scav questline), but no success...

    Headless *** quests depends on corresponding *** Hunt quests to be enabled:

    After you complete first Scav Hunt quest for location you will open access to Headless Scav and PMC Hunt quest chains. Completing first PMC Hunt and first Headless Scav will open Headless PMC for that location.

    If you want to skip Hunt quests - you need to edit Headless quest to remove conditions inside square brackets at

    "conditions": { "AvailableForStart": [ ... ]

    you need to do this only for the first quest in bundle as the rest of quests in chain will depend on completing previous one

    Quote from sata

    I dont want to enable all the new traiders, because then I have to Barter only everything.

    You do not have to do Barter Only unless you set "EnableBarterOnly" to 'true' - just leave it 'false' and all vanilla traders will be unchanged even if you choose to activate "EnableBarterOnlyQuests" for them.

  • Traders don't load

    Unfortunately this is not an issue we can easily reproduce. With your amount of RAM it should be enough.

    All I can suggest for now: try to make a new clean install with the latest client version and downgrade tool and monitor amount of RAM used while you run the game. If the problem will still be there - probably you'll have to wait until SPT-AKI 2.0 to try again, unless someone will be able to come up with better idea how to fix this.

  • Andrudis-QuestManiac

    Quote from bepis69

    I love this mod, but are there workarounds for quests failing to start? Never got the Analgin barter or the 9x19 / 12 gauge starting ammo quests.

    Not sure what do you mean by "quests failing to start" - could you clarify this a bit?

    For Analgin painkillers barter you need to first complete Esmarch tourniquet, then Aseptic bandage, then Immobilizing splint and then AI-2 medikit - all meds quests are chained


    As for ammunition - you generally need to unlock barter for weapons which use that caliber:

    for 9x19 - SMG Barter Seasoned and Handgun Barter Rookie

    for 12x70 - Shootgun Barter Seasoned

    for 23x75 - Shootgun Barter Elite

    etc...

  • No AI/scavs/raiders/PMCs on labs

    Quote from MrBlu1911

    Then say you don't know instead of telling me "wrong section" or "uninstall mods".

    Actually kikirio gave you a good advice: with 99.9% probability your issue is caused by one or more of mods you've installed, so unless you'll be able to reproduce the issue without any mods at all (which is highly unlikely) you'll not get any more help in General Support section.

    It is up to you to identify which mod(s) are causing the issue and either remove them or report to mod's author and wait for update/fix.

  • How to get version 0.12.11.13725?

    You don't - if you did not backup required version there is no coming back, wait for next update

    Also, if you want to use BE builds - you should be knowing what you are doing yourself, it is explicitly stated:

    Quote


    Unstable dev builds. Please use normal builds unless you know what you're doing.

    THIS IS A BLEEDING EDGE BUILD, USE AT YOUR OWN RISK

    NO SUPPORT IS PROVIDED FOR THESE BUILDS.

  • All USEC Bots are friendly

    This is how it works - AI by default is not hostile toward their own faction be it Scav, Raiders, Sectants or PMCs. Nothing can be done about it for now really - PMC of the same faction would be neutral until you attack one of them.

    Best thing you can do - use mods to change 80-100% of PMC to be of the opposite PMC faction

  • Andrudis-QuestManiac

    Quote from Yazms

    I have an issue with the uninstall process of the mod, now whenever i complete a default tarkov task my game goes into an infinite buffer. and console says something about mission bug fix Fail

    Usually you get problem like this when you have task in your profile which is in "Started" state, but is not available any more. To fix this you need to edit your profile and either remove references to "Started" quests of this mod or change status to "Success" for all such quests