Can't reproduce, and you didn't give steps to reproduce. Issue most likely on your end. You're using the latest version of this mod?
Yes, I'm using the latest version and running SPT 3.5.8. I think it most likely happens if I adjust the advanced sliders to move the position of the high ready on the X-axis lower down from the screen.
Yes, I'm using the latest version and running SPT 3.5.8. I think it most likely happens if I adjust the advanced sliders to move the position of the high ready on the X-axis lower down from the screen.
X-axis isn't up and down, it's side to side. You messed around with the advanced config so the first thing to do is delete the config instead of reporting it as an issue
X-axis isn't up and down, it's side to side. You messed around with the advanced config so the first thing to do is delete the config instead of reporting it as an issue
My apologies, it's the z-axis. I did delete the config. It works somewhat okay if I left it in the default z-position but on low framerates I would still experience the issue I mentioned where the weapon goes lower than normal in the active aim after transiting from high-ready.
I only thought this was an issue because this has never happened in the previous versions - no matter how I adjusted the axis values. If you thought that this isn't a problem then I'll accept it and move on.
My apologies, it's the z-axis. I did delete the config. It works somewhat okay if I left it in the default z-position but on low framerates I would still experience the issue I mentioned where the weapon goes lower than normal in the active aim after transiting from high-ready.
I only thought this was an issue because this has never happened in the previous versions - no matter how I adjusted the axis values. If you thought that this isn't a problem then I'll accept it and move on.
I need steps to reproduce it and videos demonstrating it because it's not something I can reproduce, not sure what I'm supposed to do otherwise
I need steps to reproduce it and videos demonstrating it because it's not something I can reproduce, not sure what I'm supposed to do otherwise
I deeply apologize for not investigating the core of the problem properly before posting it as an issue. I have managed to narrow down the main culprit of my problem.
In this link, you will be able to see that ADS from High Ready is a little strange, having a weird cant before rotating to the correct orientation.
In my attempt to make it less obvious, I adjusted the "High Ready Reset Speed Multi", which caused the weapon to not return to the active aim original position. I changed from the default value of 6 to ~40-50 and the issue I described in earlier posts would appear. Adjusting the z-axis position only amplified the issue and not the issue itself.
I deeply apologize for not investigating the core of the problem properly before posting it as an issue. I have managed to narrow down the main culprit of my problem.
In this link, you will be able to see that ADS from High Ready is a little strange, having a weird cant before rotating to the correct orientation.
In my attempt to make it less obvious, I adjusted the "High Ready Reset Speed Multi", which caused the weapon to not return to the active aim original position. I changed from the default value of 6 to ~40-50 and the issue I described in earlier posts would appear. Adjusting the z-axis position only amplified the issue and not the issue itself.
So the issue is that making the setting the stance speeds way higher than default bugs it out? Don't set the value really high then it'll be fine. ADS is only weird if you're using the canted sight, nothing to be done about that
Fontaine added a new version:
QuoteDisplay MoreSPT Combat Stances Overhaul v1.2.0 for SPT AKI 3.6.1
WARNING: MAKE SURE TO RESET CONFIG BY DELETING COMBATSTANCE.CFG FROM BEPINEX/CONFIGS!! Your config will most likely be reset automatically but just in case.
There is now a compatibility plugin included that is required to be used with Recoil Overhaul. If not using Recoil Overhaul then do not install the compatibility plugin. You must also update Recoil Overhaul. There is also now a folder for the mounting icons that must be installed in the BepInEx/Plugins folder.
Fixes:
- Fixed issues with arm stam drain under certain conditions.
- Fixed excessive weapon movement while walking.
Changes:
- Mounting & Bracing Mechanic: if the player's weapon is next to cover, they will be put into a Bracing state. This applies a bonus to recoil and weapon sway, and will pause arm stamina loss. Bracing bonuses will increase gradually over time from 0. If the player is aiming and bracing, they can press a keybind to Mount the cover. The weapon will be locked to the cover point with limited rotation, with a significant buff to recoil and sway and will have stamina regeneration.
- Stance Improvements: reworked and improved the look and feel of stances, stance transitions, and ADS from stance.
- Patrol Stance: added the patrol stance/weapon unready stance as seen used in Hideout and loading screen. It increases walk speed and arm stam regen the most. It's mostly for roleplaying and screenshots.
- Various minor tweaks to stam drain and stance bonuses.
Fontaine added a new version:
Quote
PT Combat Stances Overhaul v1.2.1 for SPT AKI 3.6.1
Fixes:
- Fixed weapon wobbling a lot when doing stances while walking.
Changes:
- Updated compatibility for the latest rework of Recoil Overhaul. This is required if you are going to update Recoil Overhaul. Make sure to use this download's version of the Stance-Recoil-Bridge.dll!
Fontaine added a new version:
QuoteSPT Combat Stances Overhaul v1.3.0 for SPT AKI 3.7.0
Updated to 3.7.0
Changes:
- Made mounting UI not display if sprinting.
- Smoothened dismount transition when not moving
Fontaine added a new version:
QuoteSPT Combat Stances Overhaul v1.4.1 for SPT AKI 3.7.1 - Hotfix
Fixes:
- Fixed recoil permanently lower than in base EFT.
- Fixed camera bugging out if exiting mount while prone using the crouch keybind.
Fontaine added a new version:
QuoteSPT Combat Stances Overhaul v1.4.2 for SPT AKI 3.7.1 - Hotfix
Fixes:
- Fixed walk speed not updating correctly when transitioning between active aim and aim, and lowering faceshield while aiming.
- Fixed player camera distance from sights changing when aiming out of a stance.
- Fixed game hanging when un-aiming if you have been aiming for an extended period of time.
Don’t have an account yet? Register yourself now and be a part of our community!
Just a few of the 427 users online
